N719AV1996 Canadair CL-600-2B19
Safety record in brief:No NTSB accidents or incidents since 19825 ADs may apply1 service difficulty report
Registration
FAA Aircraft Registry · Oct 17, 2026- Registered owner
- Lead And Steel LLC
- Owner type
- LLC
- City, state
- Fountain Valley, CA
- Certificate issued
- Oct 30, 2023
- Expires
- Oct 31, 2030
- Airworthiness
- Standard · Transport
- Airworthiness date
- Jun 2, 2015
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type dataAirframe
- Manufacturer
- Canadair
- Model
- CL-600-2B19
- Year
- 1996
- Serial number
- 7159
- Aircraft type
- Fixed wing multi engine
- Category
- Land
- Certification
- Type Certificated
- Seats
- 55
- Engines
- 2
- Max takeoff weight
- 20,000 and over lb
- Mode S code
- A99D90
Engine
- Make and model
- Ge Cf34-3a1
- Type
- Turbo-fan
- Power
- 9,220 lb thrust
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records- 2023 – nowLead And Steel LLCFountain Valley, CA · current
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 17, 2026 · SDRs · Oct 16, 2026NTSB events (0)
No NTSB accidents or incidents found for this airframe since 1982.
Accident history for this modelADs published since 1998 that may apply (5)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2004-26-02 | GE Aircraft Engines (GE) CF34-3A, CF34-3A2, CF34-1A, CF34-3A1, CF34-3B, and CF34-3B1… | Jan 26, 2005 | Engine (CF34-3A1)Only with: HPC forward spool P/N 6078T56P03 or 6078T56P04 installed. |
| 2004-07-18 | Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes | May 11, 2004 | Airframe (CL-600-2B19)Certain serial numbers: CL-600-2B19 7375–7632. Only with: Equipped with landing gear control handle assemblies Canadair P/N 601R50967-7 (Vendor P/N 7-45502-1) or Canadair P/N 601R50967-9 (Vendor P/N 7-45502-3). |
| 2000-14-17 | Bombardier Model CL-600-2B19 Series Airplanes | Aug 28, 2000 | Airframe (CL-600-2B19)Certain serial numbers: CL-600-2B19 7003–7207. Only with: Except airplanes on which Canadair Regional Jet Service Bulletin S.B. 601R-34-094, Revision B, dated November 14, 1997, has been accomplished. |
| 2000-01-12 | Bombardier Model CL-600-2B19 (Regional Jet Series 100) Series Airplanes | Feb 17, 2000 | Airframe (CL-600-2B19)Certain serial numbers: CL-600-2B19 7003–7185. Only with: Except airplanes on which Canadair Regional Jet Service Bulletin 601R-53-046, Revision B, or 601R-53-047, Revision D, has been accomplished. |
| 95-04-05 | Bombardier (Formerly Canadair) Model CL-600-2B19 (Regional Jet Series 100) Series… | Apr 7, 1995 | Airframe (CL-600-2B19)Certain serial numbers: CL-600-2B19 7003–on |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (1)
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
- Flight controls · control unit · faultedSep 16, 2026
FLAPS FAIL CAUTION MSG. AFTER TAKEOFF RETRACTED FLAPS PER PROFILE, RECEIVED FLAP FAIL MSG. RAN QRH PROCEDURE AND RETURNED TO LAND. FLIGHT CONTROL PAGE SHOWS FLAPS 6 ON LEFT SIDE AND FLAPS 8 ON RIGHT SIDE.
From FAA Service Difficulty Reports; matched by N-number and serial number.
Sources
- FAA Aircraft RegistryRegistration, owner city and state, airframe, engineupdated Oct 17, 2026
- NTSB accident and incident databaseAccidents and incidents since 1982updated Oct 15, 2026
- FAA Airworthiness Directives (Federal Register)ADs published since 1998updated Oct 17, 2026
- FAA Service Difficulty ReportsReports since 1995updated Oct 16, 2026