These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
Airframe (402C)Certain serial numbers: 402C 402C0001–402C1020; 414A 414A0001–414A1212. Only with: Equipped with Cessna Multi-Engine Service Kit SK402-47 (Original Issue, Rev A, or Rev B) or nacelle fittings P/Ns 5292029-9, -10, -11, -12, -21, -22, -23, or -24.
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (1)
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
Nacelles and pylons · beam · crackedMar 11, 2020
DURING ULTRASONIC INSPECTION PERFORMED IN ACCORDANCE WITH AVENGER AEROSPACE SOLUTIONS AAS-ALS-15-002 REV C PER CAPE AIR REFERENCE 1 AMOC TO SATISFY AD2015-07-03, A CRACK WAS IDENTIFIED ON THE TOP FACE OF THE RIGHT HAND INBOARD ENGINE BEAM. THIS CRACK MEASURES AT .250 AND EXTENDS ACROSS THE TOP…
From FAA Service Difficulty Reports; matched by N-number and serial number.