Safety record in brief:1 NTSB accident (substantial damage, Oct 2006)5 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The fatigue failure of the landing gear actuator pin and the exterior visual maintenance inspection for cracks not possible by company maintenance personnel.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for CHI07LA011)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2026-17-10 | Reciprocating Engine Cylinder Section | Sep 14, 2026 | Engine (O-540-J3C5D)Serial numbers per Table 2 or Table 3 of Lycoming Mandatory Service Bulletin No. 667A, dated March 12, 2026. Only with: Installed piston pin P/N LW-13445 with an OEM FAA Form 8130-3 production dated between January 7, 2021 and December 15, 2025, or where the production date cannot be determined or the form is unavailable. |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (R182) |
| 2008-10-02 | Cessna Aircraft Company 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 Series… | May 12, 2008 | Airframe (R182)Certain serial numbers: 172S 172S10672–172S10674; 172S 172S10676; 172S 172S10678–172S10680; 172S 172S10682; 172S 172S10683; 172S 172S10685; …. Only with: Applies only to airplanes that have a P/N 2013142-18 alternate static air source selector valve installed after November 19, 2007. |
| 2005-19-11 | Lycoming Engines (Formerly Textron Lycoming) AEIO-360, IO-360, O-360, LIO-360, LO-360… | Oct 21, 2005 | Engine (O-540-J3C5D)Only with: Engines rated at 300 HP or lower, manufactured new, rebuilt, or overhauled after March 1, 1999, or that had a crankshaft installed after March 1, 1999. |
| 2004-05-24 | Lycoming Engines (Formerly Textron Lycoming) AEIO-540, IO-540, LTIO-540, O-540, and… | Mar 30, 2004 | Engine (O-540-J3C5D)Only with: Engines with crankshaft gear retaining bolts P/N STD-2209 installed; excludes O-540-F series engines subject to AD 99-03-05 with bolt not since replaced, engines with bolt installed at original assembly or replaced by Lycoming per SB 554 after November 10, 1998, engines with bolt from replacement kits 05K19987, 05K23325, 05K23326, 05K23327, 05K23335 or 05K23336, and engines with single-drive dual magnetos. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
LOCKDOWN PINS BROKE AT GROOVE FOR ROLL PINS. THIS ALLOWED THE PINS TO MOVE OUT OF ACTUATOR BEARING END AND JAM THE ACTUATOR. IN THE UNLOCKED POSITION, SEB95-20 ACTUATOR DOWNLOCK PIN. INSPECTION SAYS TO CHECK FOR LOOSE PINS. THESE PINS WERE NOT LOOSE IN THE END BEARING UNTIL THE PART WAS THOROUGHLY…
From FAA Service Difficulty Reports; matched by N-number and serial number.