Safety record in brief:1 NTSB accident (substantial damage, Jan 1989)5 ADs may apply2 service difficulty reports
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
FAILURE OF THE PILOT TO MAINTAIN RUNWAY ALIGNMENT DURING TAKEOFF. THAT THE PILOT ATTEMPTED FLIGHT INTO KNOWN ADVERSE CONDITIONS FROM AN AIRPORT THAT WAS NOT APPROVED FOR IMC OPERATIONS IS CONSIDERED TO BE A CONTRIBUTING FACTOR.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for DEN89LA069)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2023-02-17 | Fuselage Main, Structure | Mar 20, 2023 | Airframe (P210N) |
| 2012-10-04 | Wings | Jun 5, 2012 | Airframe (P210N)Certain serial numbers: 210G 21058819–21058936; T210G T210-0198–T210-0307; 210H 21058937–21059061; T210H T210-0308–T210-0392; 210J 21059062–21059199; T210J 21058140; … |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (P210N) |
| 2009-16-03 | Teledyne Continental Motors (TCM) IO-520, TSIO-520, and IO-550 Series Reciprocating… | Sep 9, 2009 | Engine (TSIO-520 SER)Only with: SAP investment cast cylinder assemblies P/Ns SA52000-A1, SA52000-A20P, SA52000-A21P, SA52000-A22P, SA52000-A23P, SA55000-A1, or SA55000-A20P installed. |
| 98-05-14 R1 | Cessna Aircraft Company Models T210N, P210N, and P210R Airplanes | Sep 22, 1998 | Airframe (P210N)Certain serial numbers: T210N 21063641–21064897; P210N P21000386–P21000834 |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
REMOVED NR 2 CYL FOR BLOW BY. PULLED LIFTER ASSEMBLY TO INSPECTION CONDITION FOUND EXHAUST LIFTERBODY SPALLING. DISASSEMBLED ENGINE SENT CAM OUT. CAM WAS ALSO BAD, COULD NOT BE RECONDITIONED.
From FAA Service Difficulty Reports; matched by N-number and serial number.AIRCRAFT WAS IN THE PROCESS OF LANDING WHEN A PASSENGER NOTICED THE RIGHT GER TRAILING AND NOT IN THE DOWN AND LOCK POSITION. AFTER SEVERAL ATTEMPTS TO PUT GEAR DOWN ELECTRICALLY, PILOT PUMPED THE GEAR DOWN MANUALLY INTO LOCK POSITION. UPON TROUBLE SHOOTING, FOUND THE RIGHT MAIN LANDING GEAR…
From FAA Service Difficulty Reports; matched by N-number and serial number.