Airworthiness Directive
AD 2012-07-06: The Boeing Company Airplanes
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- May 15, 2012
- Published
- Apr 10, 2012
- Registered aircraft
- 119
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 777-200
- Boeing 777-200ER
- Boeing 777-200F
- Boeing 777-200LR
- Boeing 777-300
- Boeing 777-300ER
- Boeing 777-F6N
- Boeing 777-FFG
- Boeing 777F
- Boeing 777F16
- Boeing 777F1B
- Boeing 777F1H
- Boeing 777F28
- Boeing 777F60
- Boeing 777FB5
- Boeing 777FBT
- Boeing 777FDZ
- Boeing 777FEZ
- Boeing 777FFT
- Boeing 777FFX
- Boeing 777FHT
- Boeing 777FZB
- Boeing 777FZN
- Boeing Co 777-FS2
- Only with: Airplanes with an original airworthiness certificate or original export certificate of airworthiness issued before September 1, 2010.
- Only with: Airplanes with an original airworthiness certificate or original export certificate of airworthiness issued before September 1, 2010.
Applicability
From the AD textThis AD applies to The Boeing Company Model 777-200, -200LR, -300, -300ER, and 777F series airplanes, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued before September 1, 2010. (1) Airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or after September 1, 2010, must already be in compliance with the airworthiness limitations (AWLs) specified in this AD because those limitations were applicable as part of the airworthiness certification of those airplanes. (2) This AD requires revisions to certain operator maintenance documents to include new inspections. Compliance with these inspections is required by 14 CFR 91.403(c). For airplanes that have been previously modified, altered, or repaired in the areas addressed by these inspections, the operator may not be able to accomplish the inspections described in the revisions. In this situation, to comply with 14 CFR 91.403(c), the operator must request approval for an alternative method of compliance according to paragraph (j) of this AD. The request should include a description of changes to the…
Related ADs
Superseded or revised by AD 2025-05-10.
Read the AD in the Federal RegisterReport an error on this page