Safety record in brief:1 NTSB accident (substantial damage, Jun 2018)4 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The failure of the engine-driven hydraulic pump due to the installation of improper cap screws, which resulted in a gap in the pump housing, a subsequent hydraulic leak, and the landing gear collapsing.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ANC18LA043)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2020-03-16 | Fuselage Main, Structure | Mar 9, 2020 | Airframe (210K) |
| 2012-10-04 | Wings | Jun 5, 2012 | Airframe (210K)Certain serial numbers: 210G 21058819–21058936; T210G T210-0198–T210-0307; 210H 21058937–21059061; T210H T210-0308–T210-0392; 210J 21059062–21059199; T210J 21058140; … |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (210K) |
| 2009-16-03 | Teledyne Continental Motors (TCM) IO-520, TSIO-520, and IO-550 Series Reciprocating… | Sep 9, 2009 | Engine (IO 520 SERIES)Only with: SAP investment cast cylinder assemblies P/Ns SA52000-A1, SA52000-A20P, SA52000-A21P, SA52000-A22P, SA52000-A23P, SA55000-A1, or SA55000-A20P installed. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
HYDRAULIC PUMP LEAKS 5606 FROM HOUSING PARTING SURFACES DURING OPERATION. TWO HOUSING BOLTS APPEAR TO BE STRIPPED, BROKEN AND HOUSING SEAL IS EXTRUDING PAST PARTING SURFACES AROUND LEAKAGE AREA.
From FAA Service Difficulty Reports; matched by N-number and serial number.