This N-number isn't registered right now. Below is its last known registration, canceled Feb 5, 2022.
Safety record in brief:2 NTSB accidents (destroyed damage at worst, latest Mar 1997)5 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
failure of the pilot to maintain clearance from a power transmission line. Factors relating to the accident included ambient light conditions, which made the power line hard to see.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for SEA97LA072)
THE HELICOPTER WAS RETURNING TO A PRIVATE LANDING PAD AFTER A RECONAISANCE FLIGHT PRIOR TO SPRATING. AT ABOUT 10FT AGL AFTER FLARING AND LEVELING THE PILOT COULD NOT CONTROL A DRIFT AND ROLL TO THE LEFT. THE ROTOR BLADES STRUCK THE GROUND WITHIN ABOUT ONE SECOND. THE INVESTIGATION REVEALED THAT A SELF LOCKING NUT WAS MISSING AND A BOLT HAD BACKED OUT OF THE UPPER FIREWALL BELLCRANK ASSEMBLY…
From NTSB records; matched by N-number.Read NTSB report (search CAROL for LAX85FA199)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2006-16-04 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Sep 7, 2006 | Engine (250-C20 SER) |
| 2006-13-06 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Jul 26, 2006 | Engine (250-C20 SER)Only with: Engines with gas producer rotor assembly tie bolt P/Ns A23008020, E23008020 (EXTEX), 23008020, 6843388, 6876991 (RRC), A23008020 (SAP), or 23008020P (Pacific Sky Supply) installed. |
| 2005-10-13 | Rolls-Royce Corporation (Formerly Allison Engine Company) 250-B17B, -B17C, -B17D, -B17E… | Jun 22, 2005 | Engine (250-C20 SER)Only with: Engines that do not have turbine energy absorbing ring RRC P/N 23035175, or an equivalent FAA-approved serviceable ring, installed. |
| 97-20-15 | Hiller Aircraft Corporation Model UH- 12A, UH-12B, UH-12C, UH-12D, and UH-12E Helicopters | Nov 12, 1997 | Airframe (UH-12E) |
| 97-10-16 | Hiller Aircraft Corporation Model UH- 12, UH-12A, UH-12B, UH-12C, UH-12D, UH-12E… | Jun 27, 1997 | Airframe (UH-12E)Only with: Having control rotor blade spar tube P/N 36003, 36006, 36129, 36129-25, 36203, 36203-15, 36203-21, or 36209-3, or cuff P/N 36101-1, 36101-4, 36108, 36115-1, 36115-4, 36115-6, 36115-8, or 36124 installed; includes UH-12D and UH-12E converted to turbine power per STC SH177WE and SH178WE. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.