This N-number isn't registered right now. Below is its last known registration, canceled Sep 10, 2010.
Safety record in brief:1 NTSB incident (minor damage, Feb 2005)9 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The mechanic's inadequate inspection, which failed to discover cracks in the left wing spar around wing station 114.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for NYC05IA052)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2017-10-09 | Textron Aviation Inc. Airplanes | Jun 7, 2017 | Airframe (402C)Certain serial numbers: 402C 402C0001–402C1020; 414A 414A0001–414A1212. Only with: Equipped with Cessna Multi-Engine Service Kit SK402-47 (Original Issue, Rev A, or Rev B) or nacelle fittings P/Ns 5292029-9, -10, -11, -12, -21, -22, -23, or -24. |
| 2016-17-08 | Elevator Tab Control System | Sep 12, 2016 | Airframe (402C) |
| 2015-07-03 | Nacelles/Pylons | Apr 24, 2015 | Airframe (402C)Certain serial numbers: 402C 402C0001–402C1020; 414A 414A0001–414A1212 |
| 2012-23-01 | Wings | Dec 26, 2012 | Airframe (402C)Only with: Model 402C modified by STC SA927NW; Model 414A modified by STC SA892NW. |
| 2009-16-03 | Teledyne Continental Motors (TCM) IO-520, TSIO-520, and IO-550 Series Reciprocating… | Sep 9, 2009 | Engine (TSIO-520 SER)Only with: SAP investment cast cylinder assemblies P/Ns SA52000-A1, SA52000-A20P, SA52000-A21P, SA52000-A22P, SA52000-A23P, SA55000-A1, or SA55000-A20P installed. |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2005-20-25 | The Cessna Aircraft Company Models 401, 401A, 401B, 402, 402A, 402B, 402C, 404, 411… | Nov 9, 2005 | Airframe (402C)Certain serial numbers: 401 655; 401 401-0001–401-0322; 401A 655; 401A 401A0001–401A0132; 401B 401B0001–401B0221; 402 402-0001–402-0322; …. Only with: Equipped with an avionics bus circuit breaker switch P/N CM3589-50, 593-250-101, 593-250-102, W31-X2M5A-50, or W31-X1000-50. |
| 2005-12-13 | Cessna Aircraft Company Models 402C and 414A Airplanes | Jun 22, 2005 | Airframe (402C) |
| 2000-01-16 | Cessna Aircraft Company 300 and 400 Series Airplanes | Feb 15, 2000 | Airframe (402C) |
| 98-04-28 | Cessna Aircraft Company Models T303, 310R, T310R, 335, 340A, 402B, 402C, 404, F406, 414… | Mar 13, 1998 | Airframe (402C) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
THE LEFT GEAR SCISSOR BOLT CAME OUT ON LANDING. THE LEFT WHEEL TURNED SIDEWAYS. REPLACED WHEEL, BOLT, NUT. INSPECTED STRUT AND WHEELWELLS AND ACTUATORS. SUBMITTER STATED A PERIODIC CHANGE OF SCISSOR BOLTS WILL BE IMPLEMENTED. BOLT PN AN175-20. NUT PN AN310-5.
From FAA Service Difficulty Reports; matched by N-number and serial number.