This N-number isn't registered right now. Below is its last known registration, canceled Mar 2, 2018.
Safety record in brief:1 NTSB accident (substantial damage, Oct 2012)8 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The select/bypass valve's failure to seal correctly because of improper shimming, which resulted in an uncommanded and uncontrollable left turn during landing. Contributing to the accident was the overhaul facility's improper overhaul of the steering manifold.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for CEN13FA038)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2024-04-51 | Pratt & Whitney Canada Corp. Engines | Mar 28, 2024 | Engine (PT6A-66) |
| 2012-09-10 | Pratt & Whitney Canada Turboprop Engines | May 23, 2012 | Engine (PT6A-66)Only with: Engines with power section maintenance involving first stage sun gear or planet gear replacement since December 22, 2008, and with TAATI PMA first stage sun gears P/N E3028456 or E3037304, or planet gear sets P/N E3101455-02 or E3101525-02 installed. |
| 2002-23-13 | Pratt & Whitney Canada PT6A Series Turboprop Engines | Dec 31, 2002 | Engine (PT6A-66)Only with: Engines with turbine exhaust ducts P/N 3012290, 3031988, 3032117, 3035784, 3035786, 3105890-01, 3112167-01, or 3111780-01 installed. |
| 2000-07-11 | Industrie Aeronautiche e Meccaniche Model Piaggio P-180 Airplanes | May 29, 2000 | Airframe (P180) |
| 99-11-06 | Industrie Aeronautiche e Meccaniche Model Piaggio P-180 Airplanes | Jul 5, 1999 | Airframe (P180)Certain serial numbers: P-180 …–1031 |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 98-12-13 | Industrie Aeronautiche e Meccaniche Model Piaggio P-180 Airplanes | Jul 18, 1998 | Airframe (P180)Certain serial numbers: P-180 1001; P-180 1002; P-180 1004; P-180 1006–1033 |
| 98-08-05 | Industrie Aeronautiche e Meccaniche Model Piaggio P-180 Airplanes | May 26, 1998 | Airframe (P180)Certain serial numbers: 1001; 1002; 1004; 1006–1031 |
| 96-18-20 | Piaggio Model P-180 Airplanes | Oct 15, 1996 | Airframe (P180)Only with: Equipped with Allied Signal outflow/safety valves as specified in Allied Signal Aerospace Service Bulletins 103742-21-4059 and 103744-21-4060, both dated March 31, 1995. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
ON LANDING ROLL OUT THE ACFT SUFFERED AN UNCOMMANDED STEERING INPUT, THE ACFT EXITED THE RUNWAY AND WAS HEAVILY DAMAGED. SUBSEQUENT TESTING POINTS TO A FAILURE OF THE RECENTLY O/H STEERING MANIFOLD.
From FAA Service Difficulty Reports; matched by N-number and serial number.