This N-number isn't registered right now. Below is its last known registration, canceled Sep 13, 2022.
Safety record in brief:1 NTSB accident (substantial damage, Mar 2016)2 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot's failure to maintain direction control during the landing roll, which resulted in runway excursion, and collision with a fence.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for GAA16CA144)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2004-21-08 R1 | Aileron Control System | May 9, 2013 | Airframe (195)Only with: Equipped with at least one P/N 0322709 or P/N 0322709-1 inboard aileron hinge bracket. |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (195) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
INSPECTED ORIGINAL MAGNESIUM IB AILERON HINGE BRACKETS AND FOUND SOME OR ALL OF THE FOLLOWING CONDITIONS: SEVERELY CORRODED BRACKET BODY AROUND MOUNT AND BEARING BOSS. CRACKS SPANNING COMPLETELY ACROSS THE BEARING BOSS AND/OR MOUNTING FEET. PRIMER AND/OR BODY FILLER TO HIDE CRACKING OF BRACKETS…
From FAA Service Difficulty Reports; matched by N-number and serial number.