Airworthiness Directive

AD 2016-18-15: Fuselage

Airworthiness Directives; The Boeing Company Airplanes

Effective: Oct 13, 2016
Published: Sep 8, 2016
Registered aircraft: 261

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Serial numbers per Boeing Alert Service Bulletin 737-53A1248, Revision 2, dated October 14, 2015. Only with: Line numbers 1 through 1755 as identified in Boeing Alert Service Bulletin 737-53A1248, Revision 2.
Only with: Line numbers 1 through 1755 as identified in Boeing Alert Service Bulletin 737-53A1248, Revision 2.

Applicability

From the AD text

(1) This AD applies to The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes, certificated in any category, line number 1 through 1755, as identified in Boeing Alert Service Bulletin 737-53A1248, Revision 2, dated October 14, 2015. (2) Installation of Supplemental Type Certificate (STC) ST00830SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgSTC.nsf/0/38B606833BBD98B386257FAA00602538?OpenDocument&Highlight=st00830se) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.

Read the AD in the Federal Register Report an error on this page