Airworthiness Directive

AD 2013-19-04: Fuselage

Airworthiness Directives; the Boeing Company Airplanes

Effective: Nov 4, 2013
Published: Sep 30, 2013
Registered aircraft: 261

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Serial numbers per Boeing Special Attention Service Bulletin 737-53-1294, Revision 1, dated June 14, 2013

Applicability

From the AD text

(1) This AD applies to the Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes; certificated in any category; as identified in Boeing Special Attention Service Bulletin 737-53-1294, Revision 1, dated June 14, 2013. (2) Installation of Supplemental Type Certificate (STC) ST00830SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgstc.nsf/0/408E012E008616A7862578880060456C?OpenDocument&Highlight=st00830se) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17. For all other AMOC requests, the operator must request approval for an AMOC in accordance with the procedures specified in paragraph (l) of this AD.

Related ADs

Superseded or revised by AD 2017-02-10.

Read the AD in the Federal Register Report an error on this page