Aeronca 7AC-CONV
6 Aeronca 7AC-CONV aircraft are currently registered with the FAA, built 1946–1948.
Browse all with filters- Registered today
- 6
- Years built
- 1946–1948
- Seats
- 2
- Engines
- 1 · Reciprocating
Airworthiness Directives
ADs published since 1998 that may apply0 ADs match the Aeronca 7AC-CONV airframe. Engine ADs depend on the engine installed and are listed on each aircraft page.
AI-extracted — verify against original. Applicability must be confirmed by a mechanic against the aircraft's records.
Accident history
NTSB since 1982- NTSB events
- 1
- Destroyed
- 0
- Substantial damage
- 1
- Minor damage
- 0
- No damage
- 0
Events are NTSB accidents and incidents matched to Aeronca 7AC-CONV airframes by serial number or N-number; counts are approximate, because older events can't always be matched. Too few registered Aeronca 7AC-CONV aircraft for a meaningful yearly rate.
- Mar 15, 2009Substantial damage · none injuries · Stanley, NDN82041
Service difficulty reports
FAA SDRs since 19950 reports on Aeronca 7AC-CONV airframes. Each aircraft page lists its own reports.
Registered fleet by year built
FAA Registry| 1946 | 3 | |
|---|---|---|
| 1947 | 2 | |
| 1948 | 1 |
Buyer checklist
No ADs published since 1998 match the Aeronca 7AC-CONV airframe; engine ADs depend on the engine installed. 1 NTSB event since 1982 involve Aeronca 7AC-CONV airframes. Check each aircraft's own record before you buy.
- Read the logbooks for the airframe, engine and propeller, start to finish.
- Check AD compliance records against the ADs that may apply.
- Look for damage history and Form 337 major repairs and alterations.
- Have an independent A&P or IA do a pre-buy inspection.
- Run a title search and use escrow for the payment.
Type data
FAA aircraft reference file- Aircraft type
- Fixed wing single engine
- Category
- Land
- Certification
- Type Certificated
- Max takeoff weight
- Up to 12,499 lb