Safety record in brief:1 NTSB accident (substantial damage, Apr 2003)3 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The failure of a main landing gear axle bolt, and the subsequent separation of the right main landing gear wheel from the gear strut during the landing roll, which resulted in a collapse of the right main landing gear.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for LAX03LA143)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2020-21-22 | Fuselage; 55, Stabilizers | Dec 7, 2020 | Airframe (180A) |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (180A) |
| 98-23-02 | Cessna Aircraft Company 180 and 185 Series Airplanes | Dec 22, 1998 | Airframe (180A)Only with: Airglas Engineering Company (AECI) Model LW3600-180 or LW3600-180A fixed penetration wheel skis installed per STC SA213AL. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.