This N-number isn't registered right now. Below is its last known registration, canceled Jun 15, 1998.
Safety record in brief:2 NTSB accidents (destroyed damage at worst, latest Nov 1996)6 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
the pilot's inadequate preflight preparation and not maintaining control of the helicopter during its rearward flight. A factor was the pilot's over-confidence in his personal ability.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for CHI97FA025)
AIRCRAFT CONTROL WAS NOT MAINTAINED WHEN THE AIRCRAFT ENCOUNTERED AN UNCOTROLLED DESCENT BY THE PILOT. REMEDIAL ACTION BY THE PILOT WAS INADEQUATE. A FACTOR RELATED TO THE ACIDENT WAS LACK OF TOTAL EXPERIENCE IN TYPE OF AIRCRAFT BY THE PILOT.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for CHI91LA154)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2018-02-01 | The Enstrom Helicopter Corporation Helicopters | Feb 21, 2018 | Airframe (F-28F)Certain serial numbers: 480 5001–5006. Only with: With main rotor spindle P/N 28-14282-11 or 28-14282-13 installed. |
| 2017-26-03 | The Enstrom Helicopter Corporation Helicopters | Jan 4, 2018 | Airframe (F-28F)Only with: Rod end bearing assembly P/N 01-824-08E-011, 09455-01-824-08E-011, ECD091-1, ASMK8T, M81935/1-08K, MS21242S8K, or MTK8 installed. |
| 2012-11-05 | Enstrom Helicopter Corporation Helicopters | Jul 3, 2012 | Airframe (F-28F)Only with: Helicopters with trim relay P/N KUP14D55-24, KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or P/N AD1R-10. |
| 2011-26-10 | Enstrom Helicopter Corporation Helicopters | Jan 23, 2012 | Airframe (F-28F)Only with: Helicopters with a trim relay P/N KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or AD1R-10. |
| 2002-08-03 | Enstrom Helicopter Corporation Model F-28, F-28A, F-28C, F-28F, 280, 280C, 280F, and… | May 2, 2002 | Airframe (F-28F) |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 96-06-03 | The Enstrom Helicopter Corporation Model F-28, F-28A, F-28C, F-28C-2, F-28F, 280, 280C… | Mar 19, 1996 | Airframe (F-28F) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.