N79PP1980 Cessna 414A
Safety record in brief:No NTSB accidents or incidents since 198210 ADs may apply1 service difficulty report
Registration
FAA Aircraft Registry · Oct 16, 2026- Registered owner
- Jon Gibson Co
- Owner type
- Corporation
- City, state
- Cameron Park, CA
- Certificate issued
- Apr 12, 2016
- Expires
- Apr 30, 2029
- Airworthiness
- Standard · Normal
- Airworthiness date
- Jun 30, 1980
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type dataAirframe
- Manufacturer
- Cessna
- Model
- 414A
- Year
- 1980
- Serial number
- 414A0516
- Aircraft type
- Fixed wing multi engine
- Category
- Land
- Certification
- Type Certificated
- Seats
- 8
- Engines
- 2
- Max takeoff weight
- Up to 12,499 lb
- Mode S code
- AAB6FF
Engine
- Make and model
- Cont Motor Tsio-520 Ser
- Type
- Reciprocating
- Power
- 300 hp
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records- 2016 – nowJon Gibson CoCameron Park, CA · current
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 16, 2026 · SDRs · Oct 16, 2026NTSB events (0)
No NTSB accidents or incidents found for this airframe since 1982.
Accident history for this modelADs published since 1998 that may apply (10)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2017-10-09 | Textron Aviation Inc. Airplanes | Jun 7, 2017 | Airframe (414A)Certain serial numbers: 402C 402C0001–402C1020; 414A 414A0001–414A1212. Only with: Equipped with Cessna Multi-Engine Service Kit SK402-47 (Original Issue, Rev A, or Rev B) or nacelle fittings P/Ns 5292029-9, -10, -11, -12, -21, -22, -23, or -24. |
| 2016-17-08 | Elevator Tab Control System | Sep 12, 2016 | Airframe (414A) |
| 2015-07-03 | Nacelles/Pylons | Apr 24, 2015 | Airframe (414A)Certain serial numbers: 402C 402C0001–402C1020; 414A 414A0001–414A1212 |
| 2012-23-01 | Wings | Dec 26, 2012 | Airframe (414A)Only with: Model 402C modified by STC SA927NW; Model 414A modified by STC SA892NW. |
| 2009-16-03 | Teledyne Continental Motors (TCM) IO-520, TSIO-520, and IO-550 Series Reciprocating… | Sep 9, 2009 | Engine (TSIO-520 SER)Only with: SAP investment cast cylinder assemblies P/Ns SA52000-A1, SA52000-A20P, SA52000-A21P, SA52000-A22P, SA52000-A23P, SA55000-A1, or SA55000-A20P installed. |
Show all 10 ADsShow fewer ADs
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2005-20-25 | The Cessna Aircraft Company Models 401, 401A, 401B, 402, 402A, 402B, 402C, 404, 411… | Nov 9, 2005 | Airframe (414A)Certain serial numbers: 401 655; 401 401-0001–401-0322; 401A 655; 401A 401A0001–401A0132; 401B 401B0001–401B0221; 402 402-0001–402-0322; …. Only with: Equipped with an avionics bus circuit breaker switch P/N CM3589-50, 593-250-101, 593-250-102, W31-X2M5A-50, or W31-X1000-50. |
| 2005-12-13 | Cessna Aircraft Company Models 402C and 414A Airplanes | Jun 22, 2005 | Airframe (414A) |
| 2000-01-16 | Cessna Aircraft Company 300 and 400 Series Airplanes | Feb 15, 2000 | Airframe (414A) |
| 98-24-14 | Cessna Aircraft Company Models 340A and 414A Airplanes | Dec 21, 1998 | Airframe (414A)Certain serial numbers: 340A 215–1817; 414A 1–1212. Only with: Equipped with any WYE tube P/N 9910299-25 or P/N 9910299-26 in the engine exhaust system. |
| 98-04-28 | Cessna Aircraft Company Models T303, 310R, T310R, 335, 340A, 402B, 402C, 404, F406, 414… | Mar 13, 1998 | Airframe (414A) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (1)
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
- Power plant · mount · debondedMar 19, 2009
DURING NR 1 ENGINE REMOVAL FROM ACFT, FOUND NR 1 ENGINE ISOLATOR MOUNT ALIGNMENT PUCK DEBONDED AND SEPARATED FROM THE MAIN BODY OF THE ISOLATOR. (K)
From FAA Service Difficulty Reports; matched by N-number and serial number.
Sources
- FAA Aircraft RegistryRegistration, owner city and state, airframe, engineupdated Oct 16, 2026
- NTSB accident and incident databaseAccidents and incidents since 1982updated Oct 15, 2026
- FAA Airworthiness Directives (Federal Register)ADs published since 1998updated Oct 16, 2026
- FAA Service Difficulty ReportsReports since 1995updated Oct 16, 2026