N751051994 Schweizer 269C
Safety record in brief:No NTSB accidents or incidents since 19825 ADs may apply1 service difficulty report
Registration
FAA Aircraft Registry · Oct 19, 2026- Registered owner
- Mitchell Maverick LLC
- Owner type
- LLC
- City, state
- Mitchell, SD
- Certificate issued
- Mar 15, 2023
- Expires
- Mar 31, 2030
- Airworthiness
- Standard · Normal
- Airworthiness date
- May 26, 1994
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type dataAirframe
- Manufacturer
- Schweizer
- Model
- 269C
- Year
- 1994
- Serial number
- S1677
- Aircraft type
- Rotorcraft
- Category
- Land
- Certification
- Type Certificated
- Seats
- 3
- Engines
- 1
- Max takeoff weight
- Up to 12,499 lb
- Type certificate data sheet
- 4H12
- Mode S code
- AA2036
Engine
- Make and model
- Lycoming Hio-360 Ser
- Type
- Reciprocating
- Power
- 205 hp
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records- 2023 – nowMitchell Maverick LLCMitchell, SD · current
- 1976 – 1979Globe Aero LtdLakeland, FL · different airframe: Piper Pa-32r-300 S/N 32r-7680257
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 19, 2026 · SDRs · Oct 16, 2026NTSB events (0)
No NTSB accidents or incidents found for this airframe since 1982.
Accident history for this modelADs published since 1998 that may apply (5)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2017-14-06 | Sikorsky Aircraft Corporation Helicopters (Type Certificate Previously Held by Schweizer… | Aug 25, 2017 | Airframe (269C)Only with: Lower coupling driveshaft P/N 269-5412, 269A5504, 269A5504-003, 269A5504-005, 269A5559, or 269A5559-003 installed. |
| 2015-23-01 | Sikorsky Aircraft Corporation (Type Certificate Previously Held by Schweizer Aircraft… | Dec 15, 2015 | Airframe (269C) |
| 2001-25-52 | Schweizer Aircraft Corporation Model 269A, 269A-1, 269B, 269C, and TH-55A Helicopters | May 8, 2002 | Airframe (269C)Only with: With tailboom support strut assemblies P/N 269A2015 or 269A2015-5, tailboom center attach fitting P/N 269A2324, or center frame aft cluster fitting P/N 269A2234 or 269A2235 installed. |
| 99-17-10 | Schweizer Aircraft Corporation Model 269A, 269A-1, 269B, 269C, 269C-1, and 269D… | Sep 2, 1999 | Airframe (269C)Only with: Tail rotor swashplate shaft P/N 269A6049-3 installed. |
| 95-21-02 | Schweizer Aircraft Corporation and Hughes Helicopters, Inc. Model 269A, 269A-1, 269B… | Nov 17, 1995 | Airframe (269C)Only with: Main rotor drive shaft P/N 269A5305-3 or 269A5305-11 installed, except drive shafts with serial number prefix "SZ" or "ZS". |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (1)
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
- Fuselage · strut · brokenApr 30, 2010
(OG5S) DURING UNSCHEDULED MX THE LOWER DRIVE SUPPORT STRUT WAS FOUND TO BE CRACKED 90 PERCENT THROUGH THE TUBE WHERE THE UPPER ATTACH LUG IS WELDED. UPON REMOVAL THE LUG COMPLETELY SEPARATED FROM THE TUBE. IF TUBE HAD SEPARATED DURING FLIGHT LOSS OF MAIN ROTOR TORQUE WOULD HAVE OCCURRED.
From FAA Service Difficulty Reports; matched by N-number and serial number.
Sources
- FAA Aircraft RegistryRegistration, owner city and state, airframe, engineupdated Oct 19, 2026
- NTSB accident and incident databaseAccidents and incidents since 1982updated Oct 15, 2026
- FAA Airworthiness Directives (Federal Register)ADs published since 1998updated Oct 19, 2026
- FAA Service Difficulty ReportsReports since 1995updated Oct 16, 2026