We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type data
Airframe
Manufacturer
Enstrom Helicopter Corp
Model
280C
Year
1981
Serial number
1220
Aircraft type
Rotorcraft
Category
Land
Certification
Type Certificated
Seats
3
Engines
1
Max takeoff weight
Up to 12,499 lb
Type certificate data sheet
H1CE
Mode S code
A74BF9
Engine
Make and model
Lycoming Hi0-360 Ser
Type
Reciprocating
Power
205 hp
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records
2022 – nowIndividual ownerPendleton, OR · current
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 17, 2026 · SDRs · Oct 16, 2026
NTSB events (1)
Accident · substantial damage
May 25, 2009 · Ogden, UT
The pilot's improper use of the helicopter's collective both during the takeoff sequence and while attempting remedial action in response to an engine over-boost condition, which resulted in a hard precautionary landing.
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
Airframe (280C)Only with: Helicopters with trim relay P/N KUP14D55-24, KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or P/N AD1R-10.
Airframe (280C)Only with: Helicopters with a trim relay P/N KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or AD1R-10.