PLT WAS UNABLE TO COMPLETELY EXTEND LANDING GEAR VIA ELECTRIC AND MANUAL MEANS. A LANDING WAS MADE WITH GEAR PARTIALLY EXTENDED. EXAMINATION OF THE AIRCRAFT AFTER THE ACCIDENT REVEALED THE LANDING GEAR EXTENTION MECHANISM WAS BINDING IN THE MANUAL EXTENTION MECHANISM TUNNEL BETWEEN THE TWO FRONT SEATS. PULLING ON THE LANDING GEAR ALLOWED IT TO FREE AND OPERATE NORMALLY AFTER THIS. INSPECTION OF…
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
The New Piper Aircraft, Inc. PA-24, PA- 28R, PA-30, PA-32R, PA-34, and PA-39 Series…
Dec 8, 1998
Airframe (PA-24)Certain serial numbers: PA-28R-180 28R-30002–28R-31135; PA-28R-180 28R-7130001–28R-7130013; PA-28R-200 28R-35001–28R-35820; PA-28R-200 28R-7135001–28R-7635539; PA-28R-201 28R-7737002–28R-7737096; PA-28R-201T 28R-7703001–28R-7703239; …. Only with: All serials of PA-24, PA-24-250, PA-24-260, PA-24-400, PA-30, PA-39; PA-28R, PA-32R, PA-34 models (all serials of PA-34-200) only if not equipped with Piper P/N 78717-02 (or FAA-approved equivalent) main gear sidebrace stud in both main gear sidebrace bracket assemblies.
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (0)
No Service Difficulty Reports found for this airframe since 1995.