Safety record in brief:2 NTSB accidents (substantial damage at worst, latest Apr 2024)3 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
Maintenance personnel's improper installation of the left main landing gear wheel assembly, which resulted in a loss of torque and subsequent separation of the wheel and axle assembly from the main landing gear leg during landing.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for WPR24LA122)
The pilot’s failure to maintain directional control during the landing roll, which resulted in a ground loop.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for WPR14LA205)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2020-21-22 | Fuselage; 55, Stabilizers | Dec 7, 2020 | Airframe (180A) |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (180A) |
| 98-23-02 | Cessna Aircraft Company 180 and 185 Series Airplanes | Dec 22, 1998 | Airframe (180A)Only with: Airglas Engineering Company (AECI) Model LW3600-180 or LW3600-180A fixed penetration wheel skis installed per STC SA213AL. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.