We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type data
Airframe
Manufacturer
Enstrom
Model
F-28C
Serial number
455-2
Aircraft type
Rotorcraft
Category
Land
Certification
Type Certificated
Seats
3
Engines
1
Max takeoff weight
Up to 12,499 lb
Type certificate data sheet
H1CE
Mode S code
A67F1E
Engine
Type
Reciprocating
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records
1982 – 2013Dons Helicopter Service INCGretna, NE
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 20, 2026 · SDRs · Oct 16, 2026
NTSB events (1)
Accident · substantial damage
May 23, 1984 · Louisville, NE
ACCORDING TO THE PLT, THE HELICOPTER WAS INVOLVED IN A GROUND SEARCH WITH A NON-TRAINED PAX IN THE RIGHT SEAT. WITH THE PAX FLYING THE ACFT IN A HOVER THE RIGHT SKID CONTACTED THE MUDDY TERRAIN CAUSING THE ACFT TO ROLL OVER.
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
Airframe (F-28C)Only with: Helicopters with trim relay P/N KUP14D55-24, KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or P/N AD1R-10.
Airframe (F-28C)Only with: Helicopters with a trim relay P/N KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or AD1R-10.