Safety record in brief:1 NTSB accident (substantial damage, Aug 2016)3 ADs may apply2 service difficulty reports
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The student pilot's failure to maintain pitch control during the landing flare in gusty crosswind conditions, which resulted in a hard landing/abnormal runway contact, a partial nose wheel collapse and substantial damage to the firewall.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for GAA16CA407)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2009-10-09 R2 | Rudder Control System | Sep 12, 2011 | Airframe (152)Certain serial numbers: 150F 15061533–15064532; 150G 15064533–15064969; 150G 15064971–15067198; 150H 15067199–15069308; 150H 649; 150J 15069309–15071128; …. Only with: FA150L S/N FA1500121-FA1500261 and FA150M S/N FA1500262-FA1500336 only when equipped with FKA150-2311 and FKA150-2316. |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (152) |
| 2008-22-18 | Cessna Aircraft Company 150 Series Airplanes | Dec 9, 2008 | Airframe (152)Only with: BRS-150 Parachute System with serial number 50001 through 50006 installed via STC SA64CH. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
DURING 500HR INTERNAL INSPECTION OF MAGNETO, COIL TAB WAS FOUND TO HAVE A MANUFACTURING DEFECT AND NOT SYMETRICAL. IT APPEARS THE COIL TAB WAS MACHINE PUNCHED DURING MANUFACTURING AND THE METAL WAS NOT PROPERLY POSITIONED IN THE PUNCH PRESS CAUSING THE METAL COIL TAB TO BE SHORT OF DIMENSIONAL…
From FAA Service Difficulty Reports; matched by N-number and serial number.BRACKET FOUND CRACKED DURING REPAIRS TO HORIZONTAL STABILIZER FOLLOWING GROUND COLLISION. CRACKS IN WELDED AREA EXISTED BEFORE COLLISION. DISSIMILAR METAL CORROSION ALSO EXISTED BETWEEN STEEL BRACKET AND ALUMINUM SKINS.
From FAA Service Difficulty Reports; matched by N-number and serial number.