Safety record in brief:3 NTSB accidents (destroyed damage at worst, latest May 2016)5 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot's decision to perform a sliding takeoff from the elevated platform, which resulted in a dynamic rollover when the right skid plate caught on a protruding screw. Contributing to the accident was the pilot's failure to adequately inspect the landing platform before flight.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for CEN16LA182)
failure of the collective yoke bearing, which resulted in an uncontrolled descent and collision with trees. A factor relating to the accident was: the manufacturer's inadequate inspection interval of the yoke bearing.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for NYC95LA147)
THE PLT INITIATED A PRACTICE AUTOROTATION FROM ABOUT 600 FT AGL. AIRSPEED WAS ABOUT 55 KTS WITH LOW M/R RPM DUE TO LOW GROSS WEIGHT. A MODERATE FLARE WAS INITIATED IN AN EFFORT TO INCREASE ROTOR RPM, REDUCING THE AIRSPEED TO 40 KTS. HOWEVER, THE APPLICATION OF COLLECTIVE FAILED TO ARREST THE DESCENT RATE & THE T/R STRUCK THE GROUND CAUSING THE HELICOPTER TO VIBRATE. WHEN THE T/R STRUCK, ABOUT 6…
From NTSB records; matched by serial number.Read NTSB report (search CAROL for NYC84LA055)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2009-12-01 | Bell Helicopter Textron, Inc. Model 47, 47B, 47B3, 47D, 47D1, 47E, 47G, 47G-2, 47G-2A… | Jun 29, 2009 | Airframe (47G-3B-1)Only with: Main rotor blade installed: P/N 047-110-250-021 with S/N A-303, A-304, A-312, or A-316; or P/N 047-110-250-023 with S/N A-298, A-301, or A-305. |
| 2006-16-04 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Sep 7, 2006 | Engine (250-C18) |
| 2006-13-06 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Jul 26, 2006 | Engine (250-C18)Only with: Engines with gas producer rotor assembly tie bolt P/Ns A23008020, E23008020 (EXTEX), 23008020, 6843388, 6876991 (RRC), A23008020 (SAP), or 23008020P (Pacific Sky Supply) installed. |
| 2001-17-17 | Bell Helicopter Textron, Inc. Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G2A, 47G-2A-1… | Aug 29, 2001 | Airframe (47G-3B-1)Only with: Main rotor blade grips P/N 47-120-135-2, 47-120-135-3, 47-120-135-5, 47-120-252-1, 47-120-252-7, 47-120-252-11, 74-120-252-11, 74-120-135-5, R47-120-252-11, or R47-120-135-5 installed. |
| 98-07-09 | Bell Helicopter Textron, Inc. Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G-2A… | May 6, 1998 | Airframe (47G-3B-1) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.