This N-number isn't registered right now. Below is its last known registration, canceled Nov 25, 2014.
Safety record in brief:1 NTSB accident (substantial damage, Jul 2007)13 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The fatigue fracture and in-flight separation of a 20-inch section of the blue composite main rotor blade trailing edge, aft of the spar, due to inadequate manufacture, and the manufacturer’s subsequent failure to detect an out-of-specification deviation in the rotor blade’s trailing edge roving.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for MIA07FA116)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2016-25-13 | Safran Helicopter Engines, S.A. (Formerly Turbomeca S.A.) Turboshaft Engines | Feb 3, 2017 | Engine (ARRIEL 2B1)Only with: Engine accessory gearbox (AGB) P/N 0292120650 with a machined front casing installed. |
| 2015-13-04 | Turbomeca S.A. Turboshaft Engines | Sep 1, 2015 | Engine (ARRIEL 2B1) |
| 2014-12-05 | Turbomeca S.A. Turboshaft Engines | Aug 4, 2014 | Engine (ARRIEL 2B1) |
| 2014-07-06 | Turbomeca S.A. Turboshaft Engines | May 15, 2014 | Engine (ARRIEL 2B1)Only with: Engines that do not have modification TU157 incorporated. |
| 2012-18-18 | Turbomeca S.A. Turboshaft Engines | Oct 24, 2012 | Engine (ARRIEL 2B1)Only with: Engines not modified by TU166 modification. |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2012-03-11 | Turbomeca S.A. Turboshaft Engines | Mar 20, 2012 | Engine (ARRIEL 2B1) |
| 2011-06-07 | Eurocopter France (Eurocopter) Model EC130 B4 Helicopters | Apr 6, 2011 | Airframe (EC 130 B4)Only with: Flotation gear unit "1G" (1G unit), P/N 350A63256300, installed. |
| 2009-09-03 | Turbomeca S.A. Arriel 2B and 2B1 Turboshaft Engines | Jun 1, 2009 | Engine (ARRIEL 2B1) |
| 2009-08-08 | Turbomeca Arriel 1B, 1D, 1D1, 2B, and 2B1 Turboshaft Engines | Apr 29, 2009 | Engine (ARRIEL 2B1)Serial numbers per Figure 1 of Turbomeca Alert MSB No. A292 72 0827, Version A (Arriel 1B/1D/1D1) and Figure 1 of Turbomeca Alert MSB No. A292 72 2833, Version A (Arriel 2B/2B1), both dated March 20, 2009. Only with: Engines with power turbine modules M04 installed, as listed by SN in the referenced service bulletins. |
| 2009-01-11 | Turbomeca Arriel 2B and 2B1 Turboshaft Engines | Feb 27, 2009 | Engine (ARRIEL 2B1) |
| 2007-19-09 | Turbomeca Arriel 2B1 Turboshaft Engines | Oct 3, 2007 | Engine (ARRIEL 2B1) |
| 2007-10-06 | Turbomeca Arriel 2B1 Turboshaft Engines | May 29, 2007 | Engine (ARRIEL 2B1) |
| 2005-25-13 | Turbomeca Arriel 2B and 2B1 Turboshaft Engines | Dec 28, 2005 | Engine (ARRIEL 2B1)Only with: Engines without modification TU22 incorporated. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
SHAFT WOULD NOT BALANCE BELOW 3IPS, CHECKED ON FLAT PLATE, CENTER TUBE BENT. REPLACED SHAFT.
From FAA Service Difficulty Reports; matched by N-number and serial number.