We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type data
Airframe
Manufacturer
Cessna
Model
550
Year
1980
Serial number
550-0153
Aircraft type
Fixed wing multi engine
Category
Land
Certification
Type Certificated
Seats
8
Engines
2
Max takeoff weight
12,500 - 19,999 lb
Mode S code
A4328D
Engine
Make and model
P&W Canada Jt15d-4
Type
Turbo-fan
Power
2,500 lb thrust
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records
2022 – nowBeech Construction INCPittsburgh, PA · current
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 17, 2026 · SDRs · Oct 16, 2026
NTSB events (1)
Incident · minor damage
Mar 25, 1999 · State College, PA
Improper assembly of the left main landing gear (LMLG) actuator by the airplane manufacturer, which resulted in an incorrect 'locked' indication on the LMLG switch, and the subsequent collapse of the LMLG during taxi.
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
Cessna Model 500, 501, 550, 551, S550, 560, 560XL, and 750 Airplanes
Jul 6, 2007
Airframe (550)Serial numbers per Cessna Service Bulletins SB500-26-02, SB550-26-05, SB560-26-01, SB560XL-26-02, SB750-26-05, SBS550-26-02 (Table 1 of this AD)
Cessna Model 441, 500, 550, and 560 Series Airplanes
Jan 22, 1996
Airframe (550)Serial numbers per Allied Signal Aerospace Service Bulletins 103576-21-4054, 103576-21-4056, and 103648-21-4055. Only with: Equipped with Allied Signal outflow/safety valves identified in Allied Signal Aerospace Service Bulletins 103576-21-4054, 103576-21-4056, and 103648-21-4055.
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (1)
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
Equipment and furnishings · seat · crackedMay 5, 2003
UPPER CHAIR BASE ASSEMBLY CRACKED AT CHAIR BACK ATTACH POINTS. STRESS ON CHAIR BACK AND METAL FATIGUE PROBABLE CAUSE. ALSO PREVIOUS INAPPROPRIATE REPAIR. SOMEONE PUT A GUSSET IN AREA MARKED 2. CHAIR WAS REPAIRED IAW ST01042WI STRUCTURAL SEAT REPAIR.
From FAA Service Difficulty Reports; matched by N-number and serial number.