This N-number isn't registered right now. Below is its last known registration, canceled Sep 19, 2014.
Safety record in brief:1 NTSB accident (substantial damage, Sep 2005)2 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The gear-up landing as result of the separation of the hydraulic line in the landing gear extension system.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for DFW05CA206)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (TR182) |
| 2008-10-02 | Cessna Aircraft Company 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 Series… | May 12, 2008 | Airframe (TR182)Certain serial numbers: 172S 172S10672–172S10674; 172S 172S10676; 172S 172S10678–172S10680; 172S 172S10682; 172S 172S10683; 172S 172S10685; …. Only with: Applies only to airplanes that have a P/N 2013142-18 alternate static air source selector valve installed after November 19, 2007. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
DOWN HYDRAULIC PRESSURE LINE FAILED AT ACTUATOR. LINE PULLED OUT OF SWAGED END FITTING.
From FAA Service Difficulty Reports; matched by N-number and serial number.