Safety record in brief:1 NTSB accident (destroyed damage, May 1989)9 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
FAILURE OF THE PILOT TO SEE-AND-AVOID THE OBSTRUCTION (INADEQUATE VISUAL LOOKOUT). FACTORS RELATED TO THE ACCIDENT WERE: THE OBSTRUCTION (STATIC WIRES), AND THE LACK OF VISUAL CUES FOR THE PILOT TO DETECT THE WIRES.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for BFO89FA033)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2014-03-10 | Various Restricted Category Helicopters | Mar 26, 2014 | Airframe (UH-1B)Only with: Restricted category helicopters with cable assembly part number 205-001-720-001 installed. |
| 2002-20-01 | Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P; and… | Nov 6, 2002 | Airframe (UH-1B)Only with: Main rotor tension-torsion strap P/N 204-012-122-1, 204-012-122-5, 2601399, or 2606650 installed; manufactured by BHTI for the US Armed Forces. |
| 2002-15-04 | Honeywell International, Inc., (formerly AlliedSignal, Inc. and Textron Lycoming)… | Sep 10, 2002 | Engine (T-53)Only with: Engines with centrifugal compressor impellers having serial numbers 83317, 83327, 83328, or 83330 installed. |
| 2002-13-51 | Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, and UH-1P; and… | Aug 19, 2002 | Airframe (UH-1B)Only with: Tail rotor grip P/N 205-011-711-101 installed; helicopters manufactured by Bell for the U.S. Armed Forces. |
| 2002-01-31 | Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B, UH-1E, UH-1F, UH-1H, UH-1L, UH-1P, and… | Feb 1, 2002 | Airframe (UH-1B)Only with: Manufactured for the U.S. Armed Forces, with main rotor mast P/N 204-011-450-007, -105, or -109, or main rotor trunnion P/N 204-011-105-001 installed. |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2000-15-21 R1 | Bell Helicopter Textron Inc.-Manufactured Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B… | Nov 7, 2000 | Airframe (UH-1B)Only with: Manufactured by BHTI for the U.S. Armed Forces, with main rotor mast assembly P/N 204-011-450-001 or -005 installed. |
| 2000-15-21 | Bell Helicopter Textron Inc.-Manufactured Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B… | Aug 9, 2000 | Airframe (UH-1B)Only with: Main rotor mast assembly P/N 205-011-450-001 or -005 installed. |
| 99-07-15 | Bell Helicopter Textron, Inc.- manufactured Model HH-1K, SW204, SW204HP, SW205… | May 3, 1999 | Airframe (UH-1B)Only with: Tail rotor yoke P/N 212-011-702 (all dash numbers), P/N 212-010-704 (all dash numbers), or P/N 212-010-744 (all dash numbers) installed. |
| 97-20-09 | Bell Helicopter Textron (Bell)- manufactured Model HH-1K, TH-1F, TH-1L, UH-1A, UH-1B… | May 28, 1998 | Airframe (UH-1B)Only with: Tailboom vertical fin spar P/N 205-032-899, 205-030-846, or 205-032-851, all dash numbers, installed. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.