Safety record in brief:1 NTSB accident (substantial damage, Jul 2004)3 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot's inadequate compensation for the wind conditions during takeoff/initial climb, which resulted in a loss of control and in-flight collision with terrain. Factors contributing to the accident were the pilot's inadequate weather evaluation, and a downdraft.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ANC04CA076)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2020-21-22 | Fuselage; 55, Stabilizers | Dec 7, 2020 | Airframe (180J) |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (180J) |
| 98-23-02 | Cessna Aircraft Company 180 and 185 Series Airplanes | Dec 22, 1998 | Airframe (180J)Only with: Airglas Engineering Company (AECI) Model LW3600-180 or LW3600-180A fixed penetration wheel skis installed per STC SA213AL. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.