Airworthiness Directive

AD 2017-06-01: Fuselage

Airworthiness Directives; The Boeing Company Airplanes

Effective: Apr 5, 2017
Published: Mar 21, 2017
Registered aircraft: 6

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Boeing 737-500

Serial numbers per Boeing Special Attention Service Bulletin 737-53-1315, Revision 1, dated June 30, 2015

Applicability

From the AD text

(1) This AD applies to The Boeing Company Model 737-500 series airplanes, certificated in any category; as identified in Boeing Special Attention Service Bulletin 737-53-1315, Revision 1, dated June 30, 2015 (``SASB 737-53-1315 R1''). (2) Installation of Supplemental Type Certificate (STC) ST01219SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/ rgstc.nsf/0/ebd1cec7b301293e86257cb30045557a/$FILE/ST01219SE.pdf) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01219SE is installed, a ''change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.

Related ADs

Supersedes or revises AD 2017-03-04.

Read the AD in the Federal Register Report an error on this page