Airworthiness Directive

AD 2016-11-04: Fuselage

Airworthiness Directives; The Boeing Company Airplanes

Effective: Jul 6, 2016
Published: Jun 1, 2016
Registered aircraft: 18

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Boeing 737-300
Boeing 737-300
Boeing 737-400
Boeing 737-500

Applicability

From the AD text

(1) This AD applies to all The Boeing Company Model 737-300, -400, and -500 series airplanes; certificated in any category. (2) Installation of Supplemental Type Certificate (STC) ST01219SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/ rgstc.nsf/0/ebd1cec7b301293e86257cb30045557a/$FILE/ST01219SE.pdf) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01219SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.

Related ADs

Supersedes or revises AD 2011-23-05.

Read the AD in the Federal Register Report an error on this page