Airworthiness Directive
AD 2015-15-05: Fuselage
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- Aug 28, 2015
- Published
- Jul 24, 2015
- Registered aircraft
- 19
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 737-200
- Boeing 737-200A
- Boeing 737-200C
- Boeing 737-300
- Boeing 737-300
- Boeing 737-400
- Boeing 737-500
- Serial numbers per Boeing Alert Service Bulletin 737-53A1108, Revision 7, dated July 7, 2014
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes, certificated in any category, as identified in Boeing Alert Service Bulletin 737-53A1108, Revision 7, dated July 7, 2014. (2) Installation of Supplemental Type Certificate (STC) ST01219SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/ rgstc.nsf/0/ebd1cec7b301293e86257cb30045557a/$FILE/ST01219SE.pdf) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01219SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
Related ADs
Supersedes or revises AD 98-22-10, AD 90-06-02.
Read the AD in the Federal RegisterReport an error on this page