Airworthiness Directive
AD 2015-06-07: Fuselage
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- May 4, 2015
- Published
- Mar 30, 2015
- Registered aircraft
- 19
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 737-200
- Boeing 737-200A
- Boeing 737-200C
- Boeing 737-300
- Boeing 737-300
- Boeing 737-400
- Boeing 737-500
- Serial numbers per Boeing Special Attention Service Bulletin 737-53-1083, Revision 5, dated July 22, 2014
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 737-53-1083, Revision 5, dated July 22, 2014. (2) Installation of Supplemental Type Certificate (STC) ST01219SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/ rgstc.nsf/0/082838ee177dbf62862576a4005cdfc0/$FILE/ST01219SE.pdf) does not affect the ability to accomplish the actions required by this AD. For airplanes on which STC ST01219SE (http://rgl.faa.gov/ Regulatory_and_Guidance_Library/rgstc.nsf/0/ ebd1cec7b301293e86257cb30045557a/$FILE/ST01219SE.pdf) is installed, therefore, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
Read the AD in the Federal RegisterReport an error on this page