Airworthiness Directive
AD 2014-08-08: Fuselage
Airworthiness Directives; the Boeing Company Airplanes
- Effective
- Jun 3, 2014
- Published
- Apr 29, 2014
- Registered aircraft
- 19
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 737-200
- Boeing 737-200A
- Boeing 737-200C
- Boeing 737-300
- Boeing 737-300
- Boeing 737-400
- Boeing 737-500
- Serial numbers per Boeing Alert Service Bulletin 737-53A1329, dated June 4, 2013. Only with: Airplanes without an airstair door cutout.
- Only with: Airplanes without an airstair door cutout.
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes, certificated in any category, without an airstair door cutout, as identified in Boeing Alert Service Bulletin 737-53A1329, dated June 4, 2013. (2) Installation of Supplemental Type Certificate (STC) ST01219SE (http://rgl.faa.gov/Regulatory--and--Guidance--Library/ rgstc.nsf/0/be866b732f6cf31086257b9700692796/$FILE/ST01219SE.pdf) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01219SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of section 39.17 of the Federal Aviation Regulations (14 CFR 39.17).
Read the AD in the Federal RegisterReport an error on this page