Airworthiness Directive
AD 2014-05-02: Fuselage
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- Apr 8, 2014
- Published
- Mar 4, 2014
- Registered aircraft
- 19
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 737-200
- Boeing 737-200A
- Boeing 737-200C
- Boeing 737-300
- Boeing 737-300
- Boeing 737-400
- Boeing 737-500
- Certain serial numbers: 1–3132. Only with: Applies to line numbers 1 through 3132 inclusive; STC ST01920SE installation does not affect applicability.
- Only with: Applies to line numbers 1 through 3132 inclusive; STC ST01920SE installation does not affect applicability.
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes, certificated in any category, line numbers 1 through 3132 inclusive. (2) Installation of Supplemental Type Certificate (STC) ST01920SE (http://rgl.faa.gov/Regulatory--and--Guidance--Library/ rgstc.nsf/0/be866b732f6cf31086257b9700692796/$FILE/ST01219SE.pdf) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01920SE is installed, a ''change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
Related ADs
Superseded or revised by AD 2014-18-02.
Supersedes or revises AD 2002-10-11.
Read the AD in the Federal RegisterReport an error on this page