Airworthiness Directive

AD 2012-23-14: Fuselage

Airworthiness Directives; The Boeing Company Airplanes

Effective: Jan 7, 2013
Published: Dec 3, 2012
Registered aircraft: 19

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Boeing 737-200
Boeing 737-200A
Boeing 737-200C
Boeing 737-300
Boeing 737-300
Boeing 737-400
Boeing 737-500

Serial numbers per Boeing Alert Service Bulletin 737-53A1318, dated October 31, 2011

Applicability

From the AD text

(1) This AD applies to The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes, certificated in any category, as identified in Boeing Alert Service Bulletin 737-53A1318, dated October 31, 2011. (2) Installation of Supplemental Type Certificate (STC) ST01219SE (http://rgl.faa.gov/regulatory_and_guidance_library/rgstc.nsf/0/2C6E3DBDDD36F91C862576A4005D64E2?OpenDocument&Highlight=st01219se) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01219SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17. For all other AMOC requests, the operator must request approval for an AMOC in accordance with the procedures specified in paragraph (i) of this AD.

Read the AD in the Federal Register Report an error on this page