Airworthiness Directive
AD 2012-22-17: Fuselage
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- Dec 26, 2012
- Published
- Nov 21, 2012
- Registered aircraft
- 176
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 767-200
- Boeing 767-200ER
- Boeing 767-200SF
- Boeing 767-300
- Boeing 767-300ER
- Boeing 767-300F
- Boeing 767-300F
- Serial numbers per Boeing Service Bulletin 767-53A0209, Revision 1, dated July 27, 2011
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 767-200 and -300 series airplanes, certificated in any category, as identified in Boeing Service Bulletin 767-53A0209, Revision 1, dated July 27, 2011. (2) Supplemental Type Certificate (STC) ST01920SE (http:// rgl.faa.gov/Regulatory--and--Guidance--Library/rgstc.nsf/0/ 082838ee177dbf62862576a4005cdfc0/$FILE/ST01920SE.pdf) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01920SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17. For all other AMOC requests, the operator must request approval for an AMOC in accordance with the procedures specified in paragraph (j) of this AD.
Read the AD in the Federal RegisterReport an error on this page