We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type data
Airframe
Manufacturer
Enstrom
Model
F-28F
Serial number
755
Aircraft type
Rotorcraft
Category
Land
Certification
Type Certificated
Seats
3
Engines
1
Max takeoff weight
Up to 12,499 lb
Type certificate data sheet
H1CE
Mode S code
ACB4B8
Engine
Make and model
Lycoming Hio-360 Ser
Type
Reciprocating
Power
205 hp
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records
2016 – 2019Individual ownerBeach Lake, PA
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 20, 2026 · SDRs · Oct 16, 2026
NTSB events (2)
Accident · substantial damage
Mar 27, 2013 · Twin Falls, ID
A total loss of engine power for reasons that could not be determined because postaccident examination of the airframe and engine did not reveal any anomalies that would have precluded normal operation.
INADEQUATE VISUAL LOOKOUT BY THE PILOTS OF BOTH AIRCRAFT, WHICH RESULTED IN A FAILURE OF EACH TO SEE-AND-AVOID CONFLICTING TRAFFIC. FACTORS RELATED TO THE ACCIDENT WERE: DARKNESS, FAILURE OF THE PILOT OF AIR 28 (N48HR) TO USE HIS TRANSPONDER NEAR THE TCA, AND THE PILOT OF AIR 21 DIVERTED TOO MUCH OF HIS ATTENTION TO A MAP.
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
Airframe (F-28F)Only with: Helicopters with trim relay P/N KUP14D55-24, KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or P/N AD1R-10.
Airframe (F-28F)Only with: Helicopters with a trim relay P/N KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or AD1R-10.