This N-number isn't registered right now. Below is its last known registration, canceled Sep 26, 2024.
Safety record in brief:2 NTSB accidents (substantial damage at worst, latest Feb 2024)6 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot’s failure to maintain clearance from terrain. Contributing to the accident was the pilot’s encounter with low light conditions and snow-covered terrain.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for WPR24LA090)
the partial loss of engine power due to the slippage of the wastegate linkage as a result of the plunger on the linkage being undertorqued by an unknown person. A contributing factor was the lack of suitable terrain for the forced landing.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for DEN01LA141)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2018-02-01 | The Enstrom Helicopter Corporation Helicopters | Feb 21, 2018 | Airframe (280FX)Certain serial numbers: 480 5001–5006. Only with: With main rotor spindle P/N 28-14282-11 or 28-14282-13 installed. |
| 2017-26-03 | The Enstrom Helicopter Corporation Helicopters | Jan 4, 2018 | Airframe (280FX)Only with: Rod end bearing assembly P/N 01-824-08E-011, 09455-01-824-08E-011, ECD091-1, ASMK8T, M81935/1-08K, MS21242S8K, or MTK8 installed. |
| 2012-11-05 | Enstrom Helicopter Corporation Helicopters | Jul 3, 2012 | Airframe (280FX)Only with: Helicopters with trim relay P/N KUP14D55-24, KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or P/N AD1R-10. |
| 2011-26-10 | Enstrom Helicopter Corporation Helicopters | Jan 23, 2012 | Airframe (280FX)Only with: Helicopters with a trim relay P/N KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or AD1R-10. |
| 2002-08-03 | Enstrom Helicopter Corporation Model F-28, F-28A, F-28C, F-28F, 280, 280C, 280F, and… | May 2, 2002 | Airframe (280FX) |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 96-06-03 | The Enstrom Helicopter Corporation Model F-28, F-28A, F-28C, F-28C-2, F-28F, 280, 280C… | Mar 19, 1996 | Airframe (280FX) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.