These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
No ADs published since 1998 matched this airframe or engine model.
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (2)
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
Landing gear · fittings · crackedOct 1, 1998
DURING A ROUTINE INSPECTION, FOUND CRACK ON THE BASE OF THE MOUNTING LUG ON THE AFT RT WING STRUT/GEAR ATTACH FITTING, PN 20401-01. AFTER PEELING OFF THE REMAINING DOPE FINISH ON THE FITTING, DISCOVERED A SECOND CRACK. AT LT FITTING, PN 20401-00, AND AFTER SCRAPING OFF THE DOPE FINISH, DISCOVERED…
From FAA Service Difficulty Reports; matched by N-number and serial number.
Landing gear · fittings · crackedOct 1, 1998
DURING A ROUTINE INSPECTION, FOUND CRACK ON THE BASE OF THE MOUNTING LUG ON THE AFT RT WING STRUT/GEAR ATTACH FITTING, PN 20401-01. AFTER PEELING OFF THE REMAINING DOPE FINISH ON THE FITTING, DISCOVERED A SECOND CRACK. AT LT FITTING, PN 20401-00, AND AFTER SCRAPING OFF THE DOPE FINISH, DISCOVERED…
From FAA Service Difficulty Reports; matched by N-number and serial number.