Skip to content
KnownTail
Aircraft record

N70337Matesi Eugene E LANCAIR 320

DeregisteredUnclaimedSource: FAA, updated Oct 20, 2026

This N-number isn't registered right now. Below is its last known registration, canceled Jul 11, 2026.

Safety record in brief:1 NTSB accident (substantial damage, Jul 2025)No ADs since 1998 matched1 service difficulty report

Registration
Deregistered
Last based in
San Angelo, TX
owner city / state
Owners
1
on record
NTSB events
1
substantial, 2025
ADs may apply
0
confirm with A&P
Service reports
1
since 1995

Registration

FAA Aircraft Registry · Oct 20, 2026
Last registered owner
Individual owner
City, state
San Angelo, TX
Canceled
Jul 11, 2026

We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.

Airframe & engine

FAA Registry + type data

Airframe

Manufacturer
Matesi Eugene E
Model
LANCAIR 320
Serial number
637
Aircraft type
Fixed wing single engine
Category
Land
Certification
Not Type Certificated
Seats
2
Engines
1
Max takeoff weight
Up to 12,499 lb
Mode S code
A96294

Engine

Type
Reciprocating

Total time and engine hours aren't public. They appear here once the owner adds logbooks.

Ownership history

Ownership history from FAA records
  1. 1988Skydance Helicopters INCEl Cajon, CA · different airframe: Bell 206b-3 S/N 2983
  2. until 2026Individual ownerSan Angelo, TX

Individual owners are shown by city and state only.

Safety record

NTSB · Oct 15, 2026 · FAA ADs · Oct 20, 2026 · SDRs · Oct 16, 2026

NTSB events (1)

Accident · substantial damage

Jul 28, 2025 · Wink, TX

On July 27, 2025, about 2001 central daylight time, a Lancair 320 airplane, N70337, was substantially damaged when it was involved in an accident near Wink, Texas. The pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The pilot reported that the accident flight was to pick up the airplane that he had recently purchased in Mesa…

Damage
Substantial
Injuries
None
Report
CEN25LA291

From NTSB records; matched by serial number.Read NTSB report (search CAROL for CEN25LA291)

ADs published since 1998 that may apply (0)

These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.

No ADs published since 1998 matched this airframe or engine model.

AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.

Service Difficulty Reports (1)

Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.

  • Landing gear · rod end · failedNov 28, 1995

    ROD END FROM GEAR LEG TO OVERCENTER LINK FAILED. SUBMITTER STATED PART NEEDS TO BE REDESIGNED FROM TUBE TO SOLID BOLT.

    From FAA Service Difficulty Reports; matched by N-number and serial number.

Sources

  • FAA Aircraft RegistryRegistration, owner city and state, airframe, engineupdated Oct 20, 2026
  • NTSB accident and incident databaseAccidents and incidents since 1982updated Oct 15, 2026
  • FAA Airworthiness Directives (Federal Register)ADs published since 1998updated Oct 20, 2026
  • FAA Service Difficulty ReportsReports since 1995updated Oct 16, 2026

Request owner name removalReport an error in this record