This N-number isn't registered right now. Below is its last known registration, canceled Feb 16, 2017.
Safety record in brief:1 NTSB accident (substantial damage, Mar 2010)7 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot's failure to maintain clearance from rising terrain during takeoff resulting in collision with trees.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ANC10LA025)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2026-17-10 | Reciprocating Engine Cylinder Section | Sep 14, 2026 | Engine (IO-540-K1B5)Serial numbers per Table 2 or Table 3 of Lycoming Mandatory Service Bulletin No. 667A, dated March 12, 2026. Only with: Installed piston pin P/N LW-13445 with an OEM FAA Form 8130-3 production dated between January 7, 2021 and December 15, 2025, or where the production date cannot be determined or the form is unavailable. |
| 2025-01-01 | Landing Gear System | Mar 11, 2025 | Airframe (BN-2A-21)Only with: Fitted with Fairey Hydraulics Ltd or Britten-Norman Aircraft landing gear and associated landing gear components. |
| 2024-08-03 | Flight Control System Wiring | Jun 3, 2024 | Airframe (BN-2A-21) |
| 2005-19-11 | Lycoming Engines (Formerly Textron Lycoming) AEIO-360, IO-360, O-360, LIO-360, LO-360… | Oct 21, 2005 | Engine (IO-540-K1B5)Only with: Engines rated at 300 HP or lower, manufactured new, rebuilt, or overhauled after March 1, 1999, or that had a crankshaft installed after March 1, 1999. |
| 2004-05-24 | Lycoming Engines (Formerly Textron Lycoming) AEIO-540, IO-540, LTIO-540, O-540, and… | Mar 30, 2004 | Engine (IO-540-K1B5)Only with: Engines with crankshaft gear retaining bolts P/N STD-2209 installed; excludes O-540-F series engines subject to AD 99-03-05 with bolt not since replaced, engines with bolt installed at original assembly or replaced by Lycoming per SB 554 after November 10, 1998, engines with bolt from replacement kits 05K19987, 05K23325, 05K23326, 05K23327, 05K23335 or 05K23336, and engines with single-drive dual magnetos. |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 99-04-04 | Textron Lycoming Reciprocating Engines IO-540 and O-540 Engines Equipped With Slick… | Feb 25, 1999 | Engine (IO-540-K1B5)Only with: Equipped with Slick Aircraft Products magneto model numbers 6251, 6252, 6255, 6351 or 6355. |
| 97-22-01 | Pilatus Britten-Norman Ltd. (Formerly Britten-Norman) BN-2A, BN-2B, and BN-2T Series… | Nov 28, 1997 | Airframe (BN-2A-21) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.