Safety record in brief:1 NTSB accident (destroyed damage, May 2022)2 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot’s failure to perform a preflight weight and balance calculation and his operation of the flight at an excessive takeoff weight, resulting in an exceedance of the airplane’s critical angle of attack after liftoff and an aerodynamic stall from which the pilot was unable to recover.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ERA22FA218)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (172) |
| 2008-10-02 | Cessna Aircraft Company 172, 175, 180, 182, 185, 206, 207, 208, 210, and 303 Series… | May 12, 2008 | Airframe (172)Certain serial numbers: 172S 172S10672–172S10674; 172S 172S10676; 172S 172S10678–172S10680; 172S 172S10682; 172S 172S10683; 172S 172S10685; …. Only with: Applies only to airplanes that have a P/N 2013142-18 alternate static air source selector valve installed after November 19, 2007. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.