Safety record in brief:1 NTSB accident (substantial damage, Jun 2008)3 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot inadvertently operating the helicopter at a gross weight greater than its maximum allowable operating weight, and flying the helicopter at an airspeed greater than the never-to-exceed speed for the helicopter’s gross weight condition, resulting in structural damage to the tailcone.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for CHI08FA172)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2017-26-03 | The Enstrom Helicopter Corporation Helicopters | Jan 4, 2018 | Airframe (480B)Only with: Rod end bearing assembly P/N 01-824-08E-011, 09455-01-824-08E-011, ECD091-1, ASMK8T, M81935/1-08K, MS21242S8K, or MTK8 installed. |
| 2012-11-05 | Enstrom Helicopter Corporation Helicopters | Jul 3, 2012 | Airframe (480B)Only with: Helicopters with trim relay P/N KUP14D55-24, KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or P/N AD1R-10. |
| 2011-26-10 | Enstrom Helicopter Corporation Helicopters | Jan 23, 2012 | Airframe (480B)Only with: Helicopters with a trim relay P/N KUP14D55-472, M83536/10-015M, or M83536/10-024M installed; does not apply to helicopters with reversible trim motor P/N 28-16621 or AD1R-10. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.