Safety record in brief:1 NTSB accident (substantial damage, Jun 1996)3 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
the pilot's failure to maintain clearance between the tail rotor and a fence while hovering.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for FTW96LA274)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2006-16-04 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Sep 7, 2006 | Engine (250-C20 SER) |
| 2006-13-06 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Jul 26, 2006 | Engine (250-C20 SER)Only with: Engines with gas producer rotor assembly tie bolt P/Ns A23008020, E23008020 (EXTEX), 23008020, 6843388, 6876991 (RRC), A23008020 (SAP), or 23008020P (Pacific Sky Supply) installed. |
| 2005-10-13 | Rolls-Royce Corporation (Formerly Allison Engine Company) 250-B17B, -B17C, -B17D, -B17E… | Jun 22, 2005 | Engine (250-C20 SER)Only with: Engines that do not have turbine energy absorbing ring RRC P/N 23035175, or an equivalent FAA-approved serviceable ring, installed. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.