Safety record in brief:1 NTSB accident (substantial damage, Sep 1986)4 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
THE PILOT REPORTED THAT DURING A LANDING, THE AIRPLANE ENCOUNTERED A STRONG, GUSTY CROSSWIND JUST AFTER TOUCHDOWN, THEN NOSED OVER. THE WIND WAS REPORTED TO BE FROM THE NORTHWEST AT 5 KTS WITH GUSTS AND LIGHT TURBULENCE.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ANC86LA165)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2020-21-22 | Fuselage; 55, Stabilizers | Dec 7, 2020 | Airframe (A185F) |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (A185F) |
| 2009-16-03 | Teledyne Continental Motors (TCM) IO-520, TSIO-520, and IO-550 Series Reciprocating… | Sep 9, 2009 | Engine (IO 520 SERIES)Only with: SAP investment cast cylinder assemblies P/Ns SA52000-A1, SA52000-A20P, SA52000-A21P, SA52000-A22P, SA52000-A23P, SA55000-A1, or SA55000-A20P installed. |
| 98-23-02 | Cessna Aircraft Company 180 and 185 Series Airplanes | Dec 22, 1998 | Airframe (A185F)Only with: Airglas Engineering Company (AECI) Model LW3600-180 or LW3600-180A fixed penetration wheel skis installed per STC SA213AL. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
AIRCRAFT ON WHEEL SKIS. TURNING AIRCRAFT BY HAND APPLIED TORQUE LOAD TO LANDING GEAR.
From FAA Service Difficulty Reports; matched by N-number and serial number.