Safety record in brief:1 NTSB accident (substantial damage, Mar 2007)4 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot's failure to maintain directional control during the landing roll which resulted in a ground loop and damage to the airplane.
From NTSB records; matched by N-number.Read NTSB report (search CAROL for MIA07LA066)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2026-17-10 | Reciprocating Engine Cylinder Section | Sep 14, 2026 | Engine (IO-540-K1B5)Serial numbers per Table 2 or Table 3 of Lycoming Mandatory Service Bulletin No. 667A, dated March 12, 2026. Only with: Installed piston pin P/N LW-13445 with an OEM FAA Form 8130-3 production dated between January 7, 2021 and December 15, 2025, or where the production date cannot be determined or the form is unavailable. |
| 2005-19-11 | Lycoming Engines (Formerly Textron Lycoming) AEIO-360, IO-360, O-360, LIO-360, LO-360… | Oct 21, 2005 | Engine (IO-540-K1B5)Only with: Engines rated at 300 HP or lower, manufactured new, rebuilt, or overhauled after March 1, 1999, or that had a crankshaft installed after March 1, 1999. |
| 2004-05-24 | Lycoming Engines (Formerly Textron Lycoming) AEIO-540, IO-540, LTIO-540, O-540, and… | Mar 30, 2004 | Engine (IO-540-K1B5)Only with: Engines with crankshaft gear retaining bolts P/N STD-2209 installed; excludes O-540-F series engines subject to AD 99-03-05 with bolt not since replaced, engines with bolt installed at original assembly or replaced by Lycoming per SB 554 after November 10, 1998, engines with bolt from replacement kits 05K19987, 05K23325, 05K23326, 05K23327, 05K23335 or 05K23336, and engines with single-drive dual magnetos. |
| 99-04-04 | Textron Lycoming Reciprocating Engines IO-540 and O-540 Engines Equipped With Slick… | Feb 25, 1999 | Engine (IO-540-K1B5)Only with: Equipped with Slick Aircraft Products magneto model numbers 6251, 6252, 6255, 6351 or 6355. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
ALUMINUM FATIGUE CRACK VISUALLY AND NDT DETECTED. PROPELLER ASSY RECEIVED FOR OVERHAUL AND BLADE NR 2 OF 3 REMOVED FROM PROPELLER ASSY (HC-C3YR-1RF/ F8468A-6R, UNDER WO NR 38598A. NOTE: MANDATORY OVERHAUL REQUIRED DUE TO GROUND STRIKE, HOWEVER, BLADE SUBMITTED WAS NOT BENT AND LEAST DAMAGED. (K)
From FAA Service Difficulty Reports; matched by N-number and serial number.