This N-number isn't registered right now. Below is its last known registration, canceled May 16, 2002.
Safety record in brief:1 NTSB accident (substantial damage, Sep 2001)3 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
fatigue failure of the dual magneto mounting flanges that resulted from undetected contact damage sustained during a previous installation, which resulted in its separation from the engine during take-off.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for IAD01LA107)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2013-02-13 | Stabilizer Control System | Mar 11, 2013 | Airframe (PA-32RT-300T) |
| 2010-15-10 | Piper Aircraft, Inc. PA-28, PA-32, PA-34, and PA-44 Series Airplanes | Aug 31, 2010 | Airframe (PA-32RT-300T)Certain serial numbers: PA-28-140 28-20001–28-26946; PA-28-140 28-7125001–28-7725290; PA-28-150 28-03; PA-28-150 28-1–28-4377; PA-28-150 28-1760A; PA-28-160 28-03; … |
| 95-26-13 | The New Piper Aircraft, Inc. (Formerly Piper Aircraft Corporation) PA28 and PA32 Series… | Feb 5, 1996 | Airframe (PA-32RT-300T)Only with: Equipped with oil cooler hose assemblies that do not meet TSO-C53a, Type D requirements. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
AIRCRAFT ON CLIMBOUT FROM AIRPORT, LOST ENGINE POWER AND CRASHED. INVESTIGATION CONCLUDED MAGNETO FAILED DUE TO FATIGUE CRACK IN HOUSING CAUSING MAGNETO HOUSING TO SEPARATE FROM ENGINE.
From FAA Service Difficulty Reports; matched by N-number and serial number.