Safety record in brief:1 NTSB accident (substantial damage, Apr 1994)4 ADs may apply1 service difficulty report
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
the pilot's inadequate compensation of the existing wind conditions, and failure to maintain directional control of the aircraft.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for LAX94LA179)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2023-02-17 | Fuselage Main, Structure | Mar 20, 2023 | Airframe (177RG) |
| 2011-10-09 | Cessna Aircraft Company Models 150, 152, 170, 172, 175, 177, 180, 182, 185, 188, 190… | Jun 17, 2011 | Airframe (177RG) |
| 2006-06-16 | Lycoming Engines (Formerly Textron Lycoming) AEIO-360, IO-360, O-360, LIO-360, and… | Apr 27, 2006 | Engine (IO-360-A1B6D)Only with: Engines manufactured new or rebuilt, overhauled, or that had a crankshaft installed after March 1, 1999. |
| 2005-19-11 | Lycoming Engines (Formerly Textron Lycoming) AEIO-360, IO-360, O-360, LIO-360, LO-360… | Oct 21, 2005 | Engine (IO-360-A1B6D)Only with: Engines rated at 300 HP or lower, manufactured new, rebuilt, or overhauled after March 1, 1999, or that had a crankshaft installed after March 1, 1999. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Reports of failures and defects that operators and repair stations sent to the FAA since 1995. A report describes one finding; it is not an accident.
DURING AN ANNUAL INSPECTION, THE NOSE GEAR DRAG BRACE ASSY KNEE JOINT BOLT WAS FOUND SHEARED IN HALF. THIS BOLT IS DRILLED AND ZERKED FOR LUBRICATING. THE BOLT WAS BROKEN AT THE CENTER HOLE WHERE THE GREASE COMES OUT INSIDE THE BRACE BUSHINGS. BOLT WAS REPLACED WITH NEW. SUBMITTER SUGGESTED…
From FAA Service Difficulty Reports; matched by N-number and serial number.