Safety record in brief:1 NTSB accident (substantial damage, Mar 2006)2 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The pilot's failure to maintain directional control during the landing roll, which resulted in the airplane colliding with a snowbank and nosing over.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ANC06CA033)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2005-24-10 | American Champion Aircraft Corporation Models 7AC, 7ACA, S7AC, 7BCM, 7CCM, S7CCM, 7DC… | Jan 17, 2006 | Airframe (7GCB)Only with: Models 7ECA, 7GCAA, 7GCBC, 8KCAB, 8GCBC manufactured before August 12, 2005 with less than 250 hours TIS; or any listed model with a flight control cable (or wing retrofit kit cable) purchased from ACAC before August 12, 2005 installed and less than 250 hours TIS since installation. |
| 2000-25-02 R1 | American Champion Aircraft Corporation 7, 8, and 11 Series Airplanes | Jul 13, 2001 | Airframe (7GCB)Only with: Airplanes equipped with wood wing spars; Group 1 vs Group 2 depends on whether the engine has been modified to greater than 90 horsepower. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.