This N-number isn't registered right now. Below is its last known registration, canceled Dec 19, 2025.
Safety record in brief:1 NTSB accident (substantial damage, Jun 2024)41 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The helicopter pilot’s improper maneuvering at low altitude in gusty wind conditions, which resulted in the helicopter entering a vortex ring state, and hard landing during a subsequent autorotation.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for ERA24LA287)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2026-16-01 | Main rotor drive | Sep 10, 2026 | Airframe (AS350B3)Only with: AS350B, BA, B1, B2, B3 and AS350D helicopters manufactured before May 15, 2023 (AS350D excluding those with a Lycoming engine); EC130B4 and EC130T2 helicopters manufactured before February 13, 2023. |
| 2026-14-02 | Indication/ Recording System | Aug 14, 2026 | Airframe (AS350B3) |
| 2026-12-10 | Equipment/ Furnishings | Aug 3, 2026 | Airframe (AS350B3) |
| 2026-09-15 | Tail rotor head | Jul 21, 2026 | Airframe (AS350B3) |
| 2026-12-08 | Time Limits/ Maintenance Checks | Jul 21, 2026 | Airframe (AS350B3) |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2026-12-03 | Main rotor gearbox | Jul 14, 2026 | Airframe (AS350B3) |
| 2026-07-12 | Main rotor transmission mount | Apr 29, 2026 | Airframe (AS350B3)Only with: Applies only to helicopters delivered before January 1, 2026; helicopters designated AS350B3e are Model AS350B3. |
| 2025-18-13 | Engine Controls | Oct 23, 2025 | Airframe (AS350B3) |
| 2024-20-07 | Various Helicopters | Dec 5, 2024 | Airframe (AS350B3)Only with: Only helicopters modified by the applicable STC (SR00831LA, SR00780LA, SR01687LA, SR00856LA, SR01855LA, SR02244LA, SR01779LA, SR01459LA, SR01535LA, SR00932LA, SR02049LA, SR02484LA, or SR01902LA). |
| 2023-22-03 | Turbine section | Dec 26, 2023 | Engine (ARRIEL 2D) |
| 2022-11-08 | Airbus Helicopters | Jul 8, 2022 | Airframe (AS350B3) |
| 2022-10-51 | Airbus Helicopters and Airbus Helicopters Deutschland GmbH (AHD) Helicopters | Jun 7, 2022 | Airframe (AS350B3) |
| 2022-02-04 | Hydraulic Power System Wiring | Feb 25, 2022 | Airframe (AS350B3)Certain serial numbers: 1241; 1525; 1601; 1708; 1825; 1910; … |
| 2022-01-01 | Airbus Helicopters | Mar 7, 2022 | Airframe (AS350B3) |
| 2021-05-02 | Main Rotor System | Nov 12, 2021 | Airframe (AS350B3) |
| 2021-17-17 | Airworthiness Directives; Airbus Helicopters and Airbus Helicopters Deutschland GmbH… | Nov 22, 2021 | Airframe (AS350B3)Only with: With an affected part as defined in EASA AD 2020-0064, dated March 19, 2020, installed. |
| 2021-20-16 | Vertical Stabilizer, Spar/Rib | Nov 22, 2021 | Airframe (AS350B3)Only with: AS350B3 helicopters are excluded if Airbus Helicopters Modification 073148 was embodied in production. |
| 2021-16-16 | Airbus Helicopters | Oct 13, 2021 | Airframe (AS350B3)Only with: With litter kits installed having P/N 350-200034 or 350-200194 (left-hand) or P/N 350-200144 (right-hand). |
| 2021-16-11 | Airbus Helicopters | Oct 6, 2021 | Airframe (AS350B3)Only with: With a tail rotor gearbox (TGB) actuating rod P/N 350A27191000, 350A27191001, 350A27191002, 350A27191003, 350A27191004, 350A2719100401, 350A2719100402, 350A27192000, or with unknown part number and serial number installed. |
| 2021-14-07 | Cabin Equipment/Furnishings | Aug 19, 2021 | Airframe (AS350B3)Only with: AS332 models: with Breeze 300 lb electric hoist and hoist box P/N 332A67-2875-00 installed, without MOD 332PCS 78 288 (ASB 25.01.18); AS350/AS355 models: with Breeze, TRW, Lucas, or Air Equipement 300 lb hoist and hoist box P/N 350A63-1136-00 or -01 installed, without MOD 07 3190. |
| 2021-11-25 | Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) Helicopters | Jul 29, 2021 | Airframe (AS350B3)Only with: With an ARRIEL 2D engine and THALES FADEC P/N C13165DA00 without amendment A or P/N C13165FA00 without amendment B installed. |
| 2021-07-15 | Airbus Helicopters | May 7, 2021 | Airframe (AS350B3)Only with: With a tail rotor drive shaft bearing P/N 593404, 6007-2RS1MT47CA, P9107NPP7, 83A851BC3, or 83A851B-1C3, or MP/N 704A33-651-010, 704A33-651-111, 704A33-651-143, or 704A33-651-181 installed. |
| 2021-04-13 | Main Rotor Mast Inner Race Rings | Apr 14, 2021 | Airframe (AS350B3) |
| 2021-04-08 | Airbus Helicopters | Apr 1, 2021 | Airframe (AS350B3)Only with: With a Turbomeca ARRIEL 2B engine installed. |
| 2021-03-16 | Airbus Helicopters | Mar 3, 2021 | Airframe (AS350B3)Only with: With any sliding door installed. |
| 2020-22-20 | Airbus Helicopters | Dec 14, 2020 | Airframe (AS350B3) |
| 2020-20-14 | Airbus Helicopters | Oct 23, 2020 | Airframe (AS350B3)Only with: Main rotor servo actuator with specified P/Ns (704A448310xx/SC803x, SC8042, SC8043) manufactured before July 25, 2019 or with unknown date of manufacture installed. |
| 2020-02-23 | Equipment/ Furnishings, and 32, Landing gear | Feb 28, 2020 | Airframe (AS350B3)Only with: AS350 models modified by STC SR00470LA; AS355 models modified by STC SR00645LA. |
| 2019-16-16 | Airbus Helicopters | Sep 26, 2019 | Airframe (AS350B3)Only with: Pall Aerospace Inlet Barrier Filter (IBF) element P/N CE01301F2, CE01301F2B, CE01303F2, or CE01303F2B installed. |
| 2018-25-17 | Air Comm Corporation Air Conditioning Systems | Jan 22, 2019 | Airframe (AS350B3)Only with: Air Comm air conditioning system installed: P/N AS350-202-1 through -5 or AS350-204-1 through -12 (AS350), EC130-202-1 through -8 (EC130B4), 206EC-200 through 206EC-212 (Bell 206), or 407 EC-201 through 407 EC-203 (Bell 407). |
| 2018-15-02 | Airbus Helicopters | Aug 3, 2018 | Airframe (AS350B3)Only with: With a tail rotor pitch change rod elastomeric ball joint installed (e.g., MOD 075601 or MOD 076602). |
| 2018-01-12 R1 | Airbus Helicopters | Mar 2, 2018 | Airframe (AS350B3)Only with: Dual hydraulic system installed (Airbus modification OP 3082 or OP 3346). |
| 2018-02-02 | Airbus Helicopters | Feb 12, 2018 | Airframe (AS350B3)Only with: With M/R mast jet oil lubrication hose P/N 704A34-412-015 (manufacturing P/N 4T13) installed, except those marked with an X following the P/N. |
| 2017-22-05 | Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) | Dec 11, 2017 | Airframe (AS350B3)Only with: Hydraulic pump drive bearing P/N 704A33651243 installed. |
| 2016-25-13 | Safran Helicopter Engines, S.A. (Formerly Turbomeca S.A.) Turboshaft Engines | Feb 3, 2017 | Engine (ARRIEL 2D)Only with: Engine accessory gearbox (AGB) P/N 0292120650 with a machined front casing installed. |
| 2016-25-20 | Airbus Helicopters | Jan 31, 2017 | Airframe (AS350B3)Only with: Bi-directional suspension cross-bar P/N 350A38-1040-20 or P/N 350A38-1040-00 installed. |
| 2016-05-06 | Airbus Helicopters (Previously Eurocopter France) Helicopters | Apr 8, 2016 | Airframe (AS350B3)Only with: Reinforcement angle P/N 350A08.2493.21 or P/N 350A08.2493.23 installed (helicopters with MOD 073232 do not have these parts). |
| 2015-17-11 | Airbus Helicopters | Sep 29, 2015 | Airframe (AS350B3)Only with: Swashplate assembly with rotating star P/N 350A371003-04, -05, -06, -07, or -08 installed. |
| 2015-17-01 | Airbus Helicopters (Previously Eurocopter France) (Airbus Helicopters) Helicopters | Sep 24, 2015 | Airframe (AS350B3)Only with: Tail rotor hub pitch horn assembly P/N 350A121368.01, .02, .03, or .04, or pitch horn P/N 350A121368.XX, installed. |
| 2014-05-10 | Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) (Airbus… | May 2, 2014 | Airframe (AS350B3)Only with: Excludes AS350B3 helicopters with modification (MOD) 07 5606 installed. |
| 2014-04-11 | Airbus Helicopters (Type Certificate Previously Held by Eurocopter France) (Airbus… | Apr 9, 2014 | Airframe (AS350B3)Only with: Tail rotor blade P/N 355A12-0040-00, 355A-12-0040-01, 355A12-0040-02, 355A12-0040-03, 355A-12-0040-04, 355A12-0040-05, 355A-12-0040-07, or 355A-12-0040-08 (all S/N), or P/N 355A12-0050-04 with blade S/N 8400 through 9224, installed. |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.